• No : 257
  • Open Date : 2013/03/04 13:40
  • Print

Please explain how to set back to factory Default [INITIAL SET]

Category : 



  1. Disconnect DC IN Jack out from camera
  2. Hold down the Initial Set button
  3. Connect power adapter using DC IN Jack while holding down the Initial Set button for and release after 5 seconds or more.
  4. Wait around 3 minutes.
    Camera Power Indicator will go off then flash orange, flash green & then to solid green.


*Do not turn off the power of the camera during the process of initialization. Otherwise, it may fail to initialize
and may cause malfunction.