Is it possible to turn off the camera time and dat | FAQs | Support | Security Systems

Is it possible to turn off the camera time and date from the WV-ASM200 display?

Category :

There are three locations to be displayed the time and date in Operation Window of WV-ASM200.

These locations are shown in the picture by clicking "WV-ASM200_date_time.png" as below.

The method how to turn off is different depending on the location.

[How to turn off]

1. OSD (On Screen Display)

- This is set in each camera setting.

- It can be changed to access the camera browser, click “Setting” button,

and set “Basic - Time & Date - Time Display format” to “Off”.

2. Time and date at the upper right of Live screen

- This is set at the Menu bar in Operation Window of WV-ASM200.

- Regarding the method how to set the Menu bar and the example of before and after operation,

click "WV-ASM200_date_time_case2(before).png"

and "WV-ASM200_date_time_case2(after).png" as below.

- It can be changed to set unchecked on “Camera/time & date (I)”

*In this case the camera title is not displayed, too.

3. Time and date at the Status Bar

- This is always displayed, so it is impossible to turn it off.

This is a specification of WV-ASM200.

Attached file :: WV-ASM200_date_time.PNG; WV-ASM200_date_time_case2(before).PNG; WV-ASM200_date_time_case2(After).PNG