Panasonic ideas for life Global

FAQs

  • Font Size
  • S
  • M
  • L
  • No : 6595
  • Open Date : 2017/09/05 17:22
  • Updated Date : 2017/10/30 16:57
  • Print

How are IP addresses assigned automatically when the network settings is Auto (Advanced)?

Answer

An assignment method for IP addresses depends on whether there is the DHCP server or not.
1. No DHCP server
   IP addresses are assigned automatically according to the number of cameras 
   from 192.168.0.10 to 192.168.0.254 in order.
 
2. There is a DHCP server
    1) The Network part of IP address is undefined
       Camera searches IP addresses by using Network (IPv4)  address 
       and Subnet mask that is acquired from DHCP server.
       If there is no same IP address, camera sets the Network part of IP address.
       After camera detects the address duplication, 
       camera assigns the Host part of IP address automatically.
    2) The Network part of IP address is fixed (192.168.0)
       Camera assigns the Host part of IP address to the number of camera 
       automatically from 10 to 254 in order.
 
The technical information for the assignment of IP addresses is available by clicking as below.
 

Was this FAQ helpful to you?