FAQs

What are the default user name and password for the i-Pro series network camera and the network digital disk recorder?

Network camera・ User name: admin (lower case), ・ Password: 12345Network disk recorder・ User name: ADMIN (upper case), ・ Password: 12345【Applicable model】All models of the network camera and the rec... and more...

Can the fisheye camera (WV-SF438/WV-SW458) be connected with WV-ND200, WV-ND300, WV-ND300A, WJ-ND400 or WJ-NV200? Does it become possible by updating the firmware?

When using WV-ND200, WV-ND300 or WV-ND300A, connection with the fisheye camera is unavailable. WJ-ND400: V3.3or later WJ-NV200: V2.0 or later To compensate images recorded in the fisheye mode, WV... and more...

Can the fisheye camera (WV-SF438/WV-SW458) be used as a camera for the WJ-NVF20 Additional Business Intelligence Kit of WJ-NV200?

These formats are not available. Click here for further information about WV-NVF20. http://panasonic.biz/security/intelligence/nvf20/ and more...

How can I check the i-Pro camera firmware version or update it?

Move to the "Maintenance" page by clicking the [Maintenance] button on the setup menu page of the camera. The firmware version can be checked in the "Firmware version" field on the "Upgrade" tab pa... and more...

Is it possible to display images from the existing i-Pro SmartHD camera and BB camera (including HCM) on a multi-screen while accessing the fisheye camera (WV-SF438/WV-SW458) using a web browser?

It is possible to display images from them on a multi-screen only if the i-Pro camera and BB camera (including BB-HSM series) are accessible from the network to which the fisheye camera is connecte... and more...

Can the fisheye camera (WV-SF438/WV-SW458) be connected with the WJ-NV200 series already installed and in operation? Is it possible by updating the firmware?

Images recorded by the WJ-NV200 in the fisheye mode can be compensated and played by updating the firmware for the fisheye camera and by using WV-ASM200. Note that only images recorded using the... and more...

Why cannot the Panasonic IP setup software detect the camera?

If the camera is not detected even after rebooting the camera, check if the camera and the PC that runs the Panasonic IP setup software are on the same network. When firewall software is installe... and more...

When recording images from the fisheye camera (WV-SF438/WV-SW458) on WJ-ND200, how the camera is counted among the number of the registered camera? Is it registered as 1 camera or 4 cameras?

When the image capture mode is set other than "VGA Quad streams", the camera can be registered as 1 camera. Note that each stream should be registered as 1 camera when selecting "VGA Quad stream... and more...

Is it possible to set different image capture modes to live and recording respectively when using the fisheye camera (WV-SF438/WV-SW458)?

Yes, it is. It is possible to apply different image capture modes to each of live images and recording images by selecting "Double Panorama + Quad PTZ"/"Double Panorama + Single PTZ"/"Panorama + ... and more...

What is the dehumidification element equipped in Panasonic camera for outdoor use?

The dehumidification element equipped in Panasonic camera can discharge the minute moisture in the air to the outside of the camera by performing highly safe and low power consuming electrolysis pr... and more...