How can I set HLC function in the WV-SFx6xx series?
High Light Compensation (HLC) can be set in Setup - Image/Audio - Image/Quality menu running Firmware that is scheduled to release in May, 2014. and more...
We have not confirmed compatibility with AdjustPC. However, according to our experience, time synchronization had been possible with the software until around 2007, and began to fail after some upd... and more...
Start to overwrite an older image when theSD memory card is gone at JPEG schedule recording.However, in case ofSD memory card is enough but the log is over 5000 logs the image related the old log w... and more...
When connecting WV-SW155M cameras,should we use a PoE hub with M12 connectors.?
Yes. and more...
Recording WV-SW155 , what system requires for a PC?
CPU: IntelCoreTM 2 Duo 2.4 GHz or faster recommendedMemory: 512 MB or more (A minimum of 1 GB memory is required when using Microsoftョ Windowsョ 7 or Microsoftョ Windows Vistaョ.)Network interface: 10... and more...
Please explain how to insert a SD memory card, about WV-ST165
1 Open the cover on the side of the camera.2 Insert the SD memory card with the label facing the rear of the camera and the pins facing the front of the camera. Gently push the card with your finge... and more...
Please explain how to adjust to WV-SF135
1. Adjust the camera angle.When determining the camera angle, repeat fine adjustments by gradually moving the panningtable and tilting table.*Attach the lens adjuster (accessory) to the lens and ad... and more...
To use WV-SF135 , please explain system requirement for a PC.
CPU: IntelCoreTM2 Duo 2.4 GHz or faster recommendedMemory: 512 MB or more (A minimum of 1 GB memory is required when using Microsoftョ Windowsョ 7 or Microsoftョ Windows Vistaョ.)Network Interface: 10B... and more...
Regarding WV-SC386 ,please tell me the optional accessories.
Wall Mount Bracket : WV-Q118A Ceiling Embedding Bracket : WV-Q126Ceiling Mount Bracket : WV-Q105 and more...
Regarding WV-SC386 , please tell me the way how to take care of pan/tilt function?
If a lens and pan/tilt head are not performed for a long period of time, the grease coating inside these parts may become sticky. That may obstruct the parts from moving.To prevent this, move the l... and more...